Key data
Abstract
The TR4/TR5 double-deck machine suits buyers who need two standard roof profiles in one production system, while the bamboo profile machine fits Peru-focused production of a single decorative tile style. Compare the two machines by their supported production setup before selecting a line.
A metal roof tile making machine should match the roof profile you sell, the coil range you plan to run, and the utilities at your plant. We compare our TR4/TR5 double-deck roof forming machine with our bamboo profile machine across the specifications that affect installation and daily operation.
| Criterion | TR4/TR5 double-deck machine | Bamboo profile machine |
|---|---|---|
| Profile output | TR4 and TR5 roof profiles | Bamboo roof tile profile |
| Compatible materials | Aluzinc, galvanized steel, and color-coated steel | Aluzinc and galvanized steel |
| Material thickness | 0.3mm - 0.8mm, customizable | 0.3mm - 0.8mm |
| Production speed | 15-25 meters per minute | 10-20 m/min |
| Control system | PLC automated control with touch screen | PLC automatic control |
| Drive system | Mechanical drive or chain transmission | High-torque gear motor |
| Cutting | Hydraulic post-cutting | Hydraulic post-cutting |
| Voltage | 380V/415V/440V, 50/60Hz | 380V / 220V / 415V |
| Total power | Approximately 8kW - 12kW | 8kW - 15kW |
| Maintenance approach | Modular design for quick part replacement and routine maintenance | High-strength alloy rollers and reinforced frame for reduced wear and downtime |
The TR4/TR5 machine fits a plant that needs both TR4 and TR5 output. Its double-deck arrangement places two profile lines in one system, and the control sequence supports profile selection and automatic cutting. This is the more suitable configuration when your product range includes both profiles and you want one machine footprint for that work.
The bamboo profile machine is designed around one bamboo-style roof tile profile. We configure its working width to the required specification, so it suits a Peru-focused line where the decorative profile is the main product. Its material range covers Aluzinc and galvanized steel in the same 0.3mm - 0.8mm thickness range.
Both machines accept Aluzinc and galvanized steel, and both cover 0.3mm - 0.8mm material. The TR4/TR5 model also accepts color-coated steel, which matters if pre-painted coil is part of your product plan.
Electrical planning differs. The TR4/TR5 machine is specified for 380V/415V/440V at 50/60Hz, while the bamboo machine is specified for 380V / 220V / 415V. Check the plant supply against the selected configuration before you finalize the order. Rated total power is approximately 8kW - 12kW for the TR4/TR5 model and 8kW - 15kW for the bamboo model.
Both lines use PLC control and hydraulic post-cutting. The TR4/TR5 machine adds a touch-screen interface and uses mechanical drive or chain transmission. The bamboo machine uses a high-torque gear motor and PLC automatic control.
For the TR4/TR5 line, the touch screen supports length setting and automatic cutting management across the two profiles. For the bamboo line, PLC control supports digital length and quantity adjustment, while encoder feedback supports cutting length accuracy to within ±1mm.
The TR4/TR5 machine uses a modular design for quick part replacement and routine maintenance. Its roller system is treated to reduce scratching on Aluzinc and pre-painted coatings during forming.
The bamboo machine uses high-strength alloy rollers and a reinforced frame. Its design focuses on reducing wear and long-term downtime, with roller adjustment settings for maintaining profile geometry between batches. The machine also includes emergency stop buttons and overload protection.
Set the maintenance plan around the machine you choose. For the TR4/TR5 model, keep replacement access clear around the modular sections. For the bamboo model, plan for roller adjustment checks when changing batches and include the emergency stop and overload functions in commissioning checks.
The two options
Choose the TR4/TR5 double-deck machine when you need TR4 and TR5 profiles, color-coated steel capability, and a touch-screen PLC interface for two profile lines.
Choose the bamboo profile machine when your main product is a bamboo-style Aluzinc or galvanized steel tile for the Peru market, and your plant matches its voltage and power range.
For a closer view of the two-profile configuration, see our Double Deck TR4 TR5 Roof Forming Machine. Send us your target profile, coil material, thickness, plant voltage, and required working width so we can match the machine configuration.
The company
Cangzhou Longway International Trade Co., Ltd focus on cold roll forming machine and metal process machine. With 12 years' experience in R&D, production and marketing ,we have gained 70+ customers ,mainly from South America, North America and Europe . Our factory produce:Metal roofing machine, standing seam roof panel machine, stud and track forming machine, floor deck forming machine, steel frame roll forming machine, C Z purlin machine,slitting line, embossing machine etc .…
About Us ↗Visit company website ↗