Are you tired of struggling with the operation of your metal roofing machine's hydraulic decoiler? Longway Roll Forming Machine have the solution for you .
Please follow these steps:
- 1. Connect wire lines as the Marks shown , it using standard 380V 50Hz 3 Phase .
- 2. Connect the hydraulic system , link oil pipes with pump station inside the decoiler .
- 3. Check the control panel , it has all the control fuction , Identify the buttons or switches for functions such as up and down , forward and reverse ,turn directions, black button can adjust speed , you can see lovely rabbit

- 4. Turn on switch ,Start the decoiling process
- Turn Advance , let coil car move forward to right position , Then Rise to same level of decoiler's mandrel and Advance again .
- Turn Tension to match ID of coil , and fix the supporting arm , Press Down on to the coil . Then the coil car can be down and back .
- Adjust speed with black button , then coil can turn FWD/REV
5. Monitor the process: Keep a close eye on the uncoiling process to ensure that it is running smoothly.
-
- Always contact Longway Roll Forming Machine anytime is you have any questions during the operation , no matter Hydecoiler decoiler or metal roofing machine , we will give you best solution via video call .